GEPRC today announced the release of the TriPro-LR60 O4 Pro, a new 6-inch long-range FPV drone engineered for extended flights and outdoor exploration. Weighing just 383 grams, the TriPro-LR60 combines lightweight construction with long-range capability, positioning itself as a compelling option for pilots seeking distance without sacrificing portability.
The TriPro-LR60 introduces GEPRC’s new independent six-point suspended front module, a design shared across compatible models that allows for flexible camera and accessory setups. The drone features the brand’s signature Cinebot-style nose, delivering improved endurance while maintaining a lightweight structure.
Lightweight Long-Range Design
At 383 ± 5g, the TriPro-LR60 is built for extended flight times. GEPRC rates the drone for 26–28 minutes of flight during slow cruising flights, with actual performance varying by flight style and conditions.
TAKER F722 45A AIO Power System
The TriPro-LR60 is equipped with the TAKER F722 45A 32Bit AIO, featuring an STM32F722RET6 MCU and ICM42688-P gyroscope. The AIO combines flight controller and ESC on a single board, offering five full UARTs for GPS, VTX, and accessory integration. Powering the drone are SPEEDX2 2205E 1400KV motors paired with HQProp 6×4.3 propellers.
DJI O4 Air Unit Pro for HD Views
The TriPro-LR60 ships with the DJI O4 Air Unit Pro, capable of shooting up to 4K/120fps video with a 1/1.3-inch image sensor and 10-bit D-Log M color mode. The system delivers a minimum transmission latency of 15 milliseconds and a maximum transmission range of up to 15 kilometers under optimal FCC conditions.
ELRS Dual-Band + M10 GPS
For long-range control and positioning, the drone supports ELRS 915MHz/2.4GHz with the C3 GemX dual-band receiver, paired with the GEP-M10 GPS module for accurate positioning during extended exploration.
Included Accessories
Every version of the TriPro-LR60 includes a GPS module and a GEPRC O4 Air Unit Pro ND8 filter. The package also contains a battery carbon plate, printed landing pads, camera gimbal damping balls, battery straps, spare propellers, and a screw pack.
Specifications
| Parameter | Detail |
|---|---|
| Model | TriPro-LR60 O4 Pro |
| Frame | GEP-TP6 |
| Wheelbase | 265mm |
| Main Plate Thickness | 5mm |
| Flight System | TAKER F722 45A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyroscope | ICM42688-P |
| ESC | 32Bit 45A |
| Motor | SPEEDX2 2205E 1400KV |
| Propellers | HQProp 6×4.3 |
| VTX / Camera | DJI O4 Air Unit Pro |
| Receiver | ELRS 915MHz/2.4GHz GemX |
| GPS | GEP-M10 |
| Weight | 383 ± 5g |
| Battery Connector | XT60 |
| Recommended Battery | GEPRC 18650 6S1P 3000mAh / Storm 2.0 LiPo 6S 2200mAh |
| Flight Time | 26–28 minutes (slow cruising) |
Pricing and Availability
The GEPRC TriPro-LR60 O4 Pro is available now through GEPRC’s official store and authorized retailers. The drone is priced between $499.99 and $559.99, depending on configuration.
