Great offer for ORTUR 10W Laser Engraver with $30 off from Madethebest

In collaboration with Madethebest, we present to our readers an offer they must not miss. Below we will present laser engravers, with a brief review of each model. Before we go, we want to write a few words about the partner who made the discount possible. Who is Madethebest, and where does such a good offer come from?

Madethebest is a professional website focusing on laser engravers and 3D printers. Now it is in a deeply collaborative relationship with Ortur, becoming an official authorized third-party selling platform where the new Ortur Laser Master 3 will be released for the first time. In addition to more favorable prices, Madethebest offers free shipping and tax fee for you to buy almost all Ortur products and some other products. You are completely free to shop on Madethebest and pick the machine you like.

Ortur Laser Master 2 Pro LU2-10A

This is the new Ortur Master 2 Pro that comes with the latest 10A laser module. Be sure to consider buying this laser engraver, especially during the action.

The compact precision machine offers top quality engraving. It is great for hobbyists, but also for professional use. With the new 10A Ortur laser module, you get extra quality and power of engraving. Ortur Laser Master 2 Pro is currently on sale at a bargain price, using the promotional code we will write below.

You can order the engraver regardless of whether you are in the United States, the EU or Canada. For all customers who take advantage of the promotion, the already mentioned is valid: free shipping, tax-free payment.

Anyone who wants to buy the Ortur Master 2 Pro engraving machine, and take advantage of the discount we are writing about, follow this link.

When buying, use the promotional CODE: ZBP10A30 and get an additional $30 discount.

Ortur Laser Master 2 Pro LF/SF

The Laser Master 2 pro is thoroughly tested and is proved to be easy-to-use by “Laser”, the world’s most popular free and open-source laser control software. Through testing, the team determined that the towline-covered cable can withstand more than 5,000,000 bends, which provides a longer life for the engraver. Moreover, due to its high-quality connections, the engraver can ensure 24 hours uninterrupted operation and consistent engraving results.

It consists of an OLM-PRO-V10 motherboard and a 32-bit MCU +24V Circuit. With the help of a 12bit precision PWM control signal, it is as accurate as 0.08mm*0.15mm. Talking about the speed, the ORTUR team, through optimization, increased the maximum speed from 4000mm/min to 10000mm/min. As compared with the traditional USB to the serial port with only a 921,600 baud rate, the MCU native USB CDC interface supports a baud rate as high as 2,000,000, significantly reduce the delay caused by command transmission, shorten the engraving time. The Laser Master 2 pro is three times faster than the average engraver in the market.

Now, Laser Master 2 Pro is available on Madethebest at $399 (US Plug) or $429 (EU Plug).

Ortur Laser Master 2 S2 LF/SF

Another device we singled out from the Madethebest offer is the Ortur Laser Master 2 S2 LF/SF laser engraving machine. As with the previously mentioned model, this engraver is sold at an affordable price, but with an additional discount if you decide to buy while the action lasts.

Although it is a cheaper model, the Ortur Laser Master 2 S2 LF/SF offers top performance in its category. It is a great choice for anyone who wants the best engraving results, great hardware and a compact design and construction. The engraving area is X: 390mm x Y: 410mm, which is quite enough for everyone who makes engravings on smaller surfaces. What is worth emphasizing is the 32-Bit motherboard, as well as the original Ortur Laser Master Firmware that offers the best compatibility since it works under the same roof.

You can study the technical specifications in detail on the links we will post on the official website of the Madethebest store. We will not go into details, so let’s go back to the special offer.

Want to buy a laser engraving machine at a good price? We present the special price of the Ortur Laser Master 2 S2 LF/SF laser engraver, which can be found at the following link.

When buying, be sure to use the promotional CODE: ZBS230, which will lower the final price by $30.

A few words for the end

Finally, a little encouragement. Consider these offers seriously, because they are quality devices of a world-famous brand. Don’t miss the opportunity, and regret it later. Good luck with the new laser engraving machine.