Drones

Just a few years ago, drones were expensive and inaccessible to a wide range of people. However, every year more drones appear on the shelves at affordable prices. And all this is due to the growing popularity of multi-copters (having 3 or more rotors). The new hobby quickly turned into a whole industry, which is projected to only develop. Amateur drones are radio-controlled multi-rotor systems with a signal reception distance of up to 200 meters. Suitable for pilots of any level. Unlike professional UAVs, there are no GPS modules in them, collector motors are used, they can not be used to lift payloads. Amateur UAVs are designed for entertainment and can shoot amateur photos / videos. They will be a great gift for children and adults, as they are made qualitatively and do not require flying skills. The best solutions are offered by the companies: Syma, JJRC, Hubsan. Drones for shooting - multi-rotor systems on the radio control, which are designed to lift payload. They can be used for amateur and professional photo / video aerial photography. Professional drones are equipped with auto-return function in case of loss of radio signal, have GPS modules, can fly along the route and hang at a point. The power system of professional Quad-rocopters is built on powerful brushless motors, which allows them to fly in windy weather without loss of flight qualities. The best solutions are offered by the companies: DJI, Yuneec, Autel Robotics, 3DR, GoPro, Walkera. Also there are drones (150 - 250 class), which are intended for FPV flights (first person flight) through FPV points. These are used in competitions, special - racing drones.
    • 1: New Crazybee F4 PRO V3.0 AIO Flight controller
    • 2: Powerful and smoothly
    • 3: Easy to get RSSI
    • 4: Camera Angle adjustable
    • 5: VTX power switchable 25mw~200mw
    8.5
    • 1: Input Voltage: 3-6S Lipo
    • 2:  Con. Current: 40A
    • 3: Burst Current: 45A (5S)
    • 4: MOS Model: QN3019M6
    • 5: Firmware: BLheli_32
    7.8
    • 1: Video output Signal: cvbs
    • 2: MOS: 5X6
    • 3: Input voltage: 2-6S
    • 4: Motor Length: 20mm
    • 5: Configu-ration: 12N/14P
    8.5
    • 1: Main control chip: STM32F411
    • 2: MCU:48MHz EFM8BB21F16G
    • 3: Input Voltage: 2-6S
    • 4: Con. Current: 20A
    • 5: Burst Current: 25A (10S)
    8.5
    • 1: Tyro79 140mm Frame Kit
    • 2: F4 OSD Flight Controller
    • 3: 20A BLheli_S 4In1 Brushless ESC
    • 4: 1607 2800KV 2-4S Brushless Motor
    • 5: Racerstar Tornado 3040 3-Blade Propeller
    8.3
    • 1: Drone Wheelbae: 115mm
    • 2: Arm Plate Thickness: 3mm
    • 3: Material: 3K Carbon Fiber
    • 4: Max. Prop Support: 2.5 Inch
    • 5: Motor Mount Hole: 9mm
    8.5
    • 1: 24gram 1-2s brushless 65mm whoop
    • 2: New AIO 4in1 CrazybeeX flight controller
    • 3: Smooth and powerful
    • 4: CADDX ANT Camera
    • 5: High performance ET2.0 plug
    8.3
    • 1: 65mm whoop with 35mm propellers
    • 2: Smooth and powerful
    • 3: Compatible for 1S Lipo/LIHV
    • 4: Camera Angle adjustable
    • 5: The lightest 1/3 CMOS 800TVL Camera
    8.5
    • 1: 6 minutes of flight
    • 2: Powerful and smoothly
    • 3: Betaflight OSD support
    • 4: Camera Angle adjustable
    • 5: Compatible with FrSky D8
    8.5
    • 1: 5.8Ghz 40Ch RX with dual antennas
    • 2: More than 2h working hours
    • 3: 500lux ultra-high luminance
    • 4: Support replaying function
    • 5: Support up to 32G TF card
    8.3
    • 1: Under 250g
    • 2: AVAN 3.5 Inch Prop
    • 3: ECO 1404 3700KV Motor
    • 4: Powerfule and Lightweight
    • 5: Drone Wheelbase: 155mm
    8.5
    • 1: Wheelbase: 160mm
    • 2: Lipo Battery: 4S 14.8V 850mAh 80C Lipo Battery XT30 Plug
    • 3: Brushless Motor: RS1606 3300KV Motor
    • 4: Version: BNF ( Compatible with Frsky D8 Receiver)
    • 5: Propeller: EMAX Avan Scimitar 4024 / 4028 4 Inch 3-blade Propeller
    8.3
    • 1: 1106 6000KV brushless motors
    • 2: Mini magnum F4 2 lite
    • 3: 25amp 4 in 1 BLHeli - 32 ESC ( 20 x 20 mounting )
    • 4: F405 matek HEX target using BetaFlight OSD
    • 5: 5 available Uart ports
    8.5
    • 1: Performance Brushless Motors
    • 2: Mini Magnum III F4 Flight Controller
    • 3: Magnum 3-6S 35A
    • 4: EMAX Tiny D8 FrSky Receiver
    • 5: Caddx Turbo Micro F2 1200TVL FPV Camera
    8.5
    • 1: Propeller: Avan Flow 5 inches 3-blade
    • 2: Brushless motor: EMAX LS2206 2300KV motors
    • 3: Flying Time: 4~5mins
    • 4: Brushless ESC: EMAX bullet 30A 4 in 1 BLHeli - S DShot600
    • 5: Flight Controller Type: F4
    8.0
    • 1: Drone Weight: 20g
    • 2: FC Firmware: MATEKF411RX firmware
    • 3: Onboard Receiver: SPI RX
    • 4: Onboard ESC: 5A
    • 5: Onboard VTX: 5.8G 37CH 25mW VTX
    8.5
    • 1: Four-axis structure
    • 2: Built-in barometer
    • 3: Modular design
    • 4: One-click 360-degree roll feature
    • 5: 3 speed modes
    7.5
    • 1: Pitch: 23mm
    • 2: KV: 15000KV
    • 3: Channels: 37CH
    • 4: Camera: 600TVL CMOS
    • 5: Battery: 1S 4.35V 450mAh LiHV
    8.3
    • 1: Diagonal wheelbase
    • 2: Maximum size of the aircraft
    • 3: Aircraft weight: 53g
    • 4: Motor: TH1103-7000KV
    • 5: Propeller: Avan Rush 2.5 inch Propeller
    8.5
    • 1: Wheelbase: 75mm
    • 2: Dry Weight: 31.2g
    • 3: All Up Weight: 43.5g with 1x 450mAh 1S battery
    • 4: Frame Material: Polypropylene
    • 5: Stator Size: 0802
    7.8
    • 1: Wheelbase: 75mm
    • 2: Motor: H0802 15500KV Motor
    • 3: VTX: 37CH 25mW VTX
    • 4: Camera: 600TVL CMOS Camera
    • 5: Propeller: Avan TH Tinyhawk
    8.5
    • 1: Brushless motor that is both smaller
    • 2: increasing the power output
    • 3: Up to 20% more flight time
    • 4: Dual slot mount
    • 5: Camera will be able to adjust its angle
    8.8
    • 1: 8KM Transmission Range
    • 2: 30 mins Flight Time
    • 3: Type-C Fast-Charging Battery
    • 4: Stabilized 3-Axis Mechanical Gimbal
    • 5: 4K HDR Video
    8.5
    • 1: Wind resistance: ≤50kph
    • 2: Flying limit altitude: 500m
    • 3: Operating frequency: 5.725-5.850 GHz
    • 4: Battery : 3900mAh lithium battery
    • 5: Stabilization: 3-axis gimbal
    8.5
    • 1: SPCMaker F411 FC AIO 6A ESC
    • 2: RCINPower 1202 Plus 11500KV Motor
    • 3: Gemfan 3018
    • 4: PandaRC VT5804 Nano 400mW VTX
    • 5: Runcam Racer Nano 2 1000TVL FPV Camera
    8.5
    • 1: ABS engineering material
    • 2: Fixed speed driving
    • 3: Yaw automatic correction
    • 4: Long distance strong signal receiving system
    • 5: Double motor and three propeller design
    8.3
    • 1: Drone Wheelbase: 138
    • 2: Material: 3K Carbon Fiber
    • 3: Top Plate Thickness: 1.5mm
    • 4: Bottom Plate Thickness: 2mm
    • 5: Weight: 273g
    8.5
    • 1: Almost all parts are injection molded
    • 2: Very easy to disassemble and install
    • 3: Efficient power configuration
    • 4: No Propellers in view
    • 5: SMO camera
    8.3
    • 1: GOKU F411 Micro Stack
    • 2: GOKU BS13A ESC
    • 3: NIN 1404 V2 2750KV Motor
    • 4: Gemfan 4024 Propeller
    • 5: Caddx Vista HD Digital System
    8.5
    • 1: FreeStyle 5"-5.2" inch
    • 2: No need to remove any parts
    • 3: Four switching modes
    • 4: Three reserved space
    • 5: Camera can't see the propeller
    8.3

HOT DEALS