Drones

Just a few years ago, drones were expensive and inaccessible to a wide range of people. However, every year more drones appear on the shelves at affordable prices. And all this is due to the growing popularity of multi-copters (having 3 or more rotors). The new hobby quickly turned into a whole industry, which is projected to only develop. Amateur drones are radio-controlled multi-rotor systems with a signal reception distance of up to 200 meters. Suitable for pilots of any level. Unlike professional UAVs, there are no GPS modules in them, collector motors are used, they can not be used to lift payloads. Amateur UAVs are designed for entertainment and can shoot amateur photos / videos. They will be a great gift for children and adults, as they are made qualitatively and do not require flying skills. The best solutions are offered by the companies: Syma, JJRC, Hubsan. Drones for shooting - multi-rotor systems on the radio control, which are designed to lift payload. They can be used for amateur and professional photo / video aerial photography. Professional drones are equipped with auto-return function in case of loss of radio signal, have GPS modules, can fly along the route and hang at a point. The power system of professional Quad-rocopters is built on powerful brushless motors, which allows them to fly in windy weather without loss of flight qualities. The best solutions are offered by the companies: DJI, Yuneec, Autel Robotics, 3DR, GoPro, Walkera. Also there are drones (150 - 250 class), which are intended for FPV flights (first person flight) through FPV points. These are used in competitions, special - racing drones.
    • 1: SPI BUS receiver Frsky D8 compatible
    • 2: Compatible Non EU transmitter D8 model
    • 3: Channels: 8ch
    • 4: Failsafe support
    • 5: Built-in 5.8G VTX
    9.0
    • 1: KV options: KV7000
    • 2: Shaft Diameter: Φ1.5mm
    • 3: Stator Diamter:11mm
    • 4: Sensor: MPU-6000 (SPI connection)
    • 5: Power Supply: 2-4S battery input (DC 7-17V)
    8.5
    • 1: Ultra-lightweight 3.5-inch
    • 2: HD video transmission
    • 3: Integrated ExpressLRS SPI receiver
    • 4: Frsky SPI D8/D16 receiver
    • 5: High efficiency EX1404 power system
    7.3
    • 1: 41 gram 1-2s brushless Toothpick drone
    • 2: New AIO 4in1 CrazybeeX flight controller
    • 3: CADDX ANT 1200tvl Camera
    • 4: New 1202.5 brushless motor
    • 5: XT30 connector
    8.5
    • 1: Wheel base: 102mm
    • 2: Power input: 3S-4S lipo battery
    • 3: Motor: 1105 4500KV brushless motor
    • 4: ESC: 4in1 BLheliS 15A
    • 5: Camera: Runcam split mini 3
    8.5
    • 1: Portable and lightweight
    • 2: Variety expansion
    • 3: Adjustable Tape for easy adjustment
    • 4: Long distance transmission
    • 5: Independent communication
    8.5
    • 1: Using GEPRC-12A-F4 FC system
    • 2: No Propellers in view
    • 3: The Newly Developed GR8 Remote Controller
    • 4: High-Quality FPV Goggle
    • 5: High definition 800 * 480px
    8.5
    • 1: Camera: Caddx Vista Nebula
    • 2: Motor to motor:79mm
    • 3: Antenna:5.8G
    • 4: Motor:GR1103 8000KV
    • 5: Flight Controller:GEP-12A-F4 AIO
    8.0
    • 1: Ultra-light weight
    • 2: Caddx baby turtle V2 1080P Caemra
    • 3: Reliable electronic equipment, reducing weight
    • 4: High-definition TPU printing
    • 5: Full 3K carbon plate
    8.5
    • 1: Prop out of view
    • 2: Compatibled with DJI Air Unit
    • 3: 720P 120fps FPV
    • 4: GEP-GR1507 3600KV Motor
    • 5: 4S Lipo(650-850mAh)is recommended
    8.3
    • 1: 2-inch Props guards
    • 2: GEP-20A-F4 AIO
    • 3: High efficiency power system
    • 4: Motor GR1204 5000KV
    • 5: 2 inch 4-blades propeller
    8.3
    • 1: Aluminum alloy side plates
    • 2: Supports Bluetooth wireless connection
    • 3: Developed specifically
    • 4: Unique shock absorbing structure design
    • 5: Specially designed independent capacitor
    8.3
    • 1: Wheelbase: 224mm
    • 2: Material: 3K Carbon Fiber
    • 3: Arms plate : 5mm
    • 4: Side plate : 2.5mm
    • 5: Top plate : 2.5mm
    8.5
    • 1: Flight Controller: GEP-20A-F4 AIO
    • 2: Camera: Caddx Turbo Eos2
    • 3: Motor to motor: 153mm
    • 4: Propeller: HQ4*4.3*3 V1S
    • 5: Antenna: RG178 5.8g RHCP
    8.5
    • 1: Motor to Motor: 156mm
    • 2: FC: SPAN F722 HD
    • 3: MCU: STM32F722
    • 4: OSD: BetaFlight OSD w
    • 5: Camera: Caddx Ratel V2
    8.5
    • 1: Wheelbase: 174mm
    • 2: MCU: STM32F411
    • 3: Type-C USB interface
    • 4: OSD: BetaFlight OSD w/ AT7456E chip
    • 5: Power input: 4S LiPo
    8.3
    • 1: Drone Wheelbase: 144mm
    • 2: Frame Model: GEPRC GEP-CS3
    • 3: Bottom Plate Thickness: 3mm
    • 4: Top Plate Thickness: 3mm
    • 5: Material: Full 3K Carbon Fiber & CNC 7075
    8.8
    • 1: 3-inch propeller with guard
    • 2: Dual Camera System
    • 3: STABLE V2 F4 30A SYSTEM
    • 4: 500mW VTX Power
    • 5: Better airflow, Higher flight efficiency
    8.3
    • 1: Model:STABLE PRO F7 35A
    • 2: MCU: STM32F722RET6
    • 3: IMU: 2x ICM20689(SPI)
    • 4: BlackBox: 32Mb onboard Flash
    • 5: Firmware target: EXF722DUAL
    8.3
    • 1: New camera damping system
    • 2: Brand-new exclusive pusher frame
    • 3: Low noise optimization
    • 4: Long range flight
    • 5: Low center of gravity design
    8.5
    • 1: GR1103 8000KV
    • 2: MCU: STM32F411
    • 3: Mounting holes: 16mm*16mm
    • 4: Input voltage 2-4S LIPO
    • 5: Firmware target: MATEKF411
    8.5
    • 1: Wheelbase: 95mm
    • 2: Camera: RunCam Hybrid 4K
    • 3: Motors: GR1105 5000KV
    • 4: Recommend battery: 3-4S 450-550mAh Batter
    • 5: Weight: 4s version 99g (Without battery)
    8.5
    • 1: 155mm FPV
    • 2: MCU: STM32 F722RET6
    • 3: Material: 3K Carbon Fiber
    • 4: Side Plate: 1.5mm
    • 5: Weight: 247g
    8.5
    • 1: Use Play F4 flight controller
    • 2: Prepare Smartaudio
    • 3: Support Betaflight adjustment
    • 4:
    • 5:
    8.0
    • 1: Flight controller: Play F4 Whoop
    • 2: Version: F411CEU6
    • 3: Sensor: MPU-6000
    • 4: Board Size: 28.5 * 28.5MM
    • 5: Current: 5A continuous peak 7A
    8.5
    • 1: Newly adopted 1204 motor
    • 2: Caddx Tarsier 4K Camera & DVR ready
    • 3: Camera Angle adjustable
    • 4: VTX power switchable 25mw~200mw
    • 5: Smartaudio ready
    8.5
    • 1: Wheelbase: 120mm
    • 2: Size: 144mm *164mm * 46mm
    • 3: Weight: 97.25g
    • 4: Sensor: MPU-6000
    • 5: Motor Mode: GL1204 KV4500
    8.3
    • 1: Integrated injection molding material
    • 2: 2-3S flight control system
    • 3: Using runcam latest nano4 FPV competition camera
    • 4: The upgrade adopts 400MW VTX image transmission
    • 5: Adopting 2020 four blade ducted propeller
    8.5
    • 1: MCU: STM32F411CEU6
    • 2: Sensor: MPU-6000
    • 3: Onboard 4 In 1 ESC
    • 4: SBUS Receiver
    • 5: Protocol: DSM2/DSMX Compatible
    8.5
    • 1: MCU: STM32F411CEU6
    • 2: Sensor: MPU-6000
    • 3: Store: Onboard black box
    • 4: Board size: 21x21mm
    • 5: Power supply: 2-4S battery input
    8.3

HOT DEALS