Longer Ray2

Longer Ray2

Brand: LONGER
Category: Laser Engraver
  • 1: Multiple Power Options
  • 2: Class I Laser Safety
  • 3: Ready to Use Out of the Box
  • 4: AI-Powered Creativity
  • 5: High-Speed Precision Engravin

PRICE

Our Rating

The overall rating is based on review by our experts

7.5
  • Design 8 / 10
  • Features 7 / 10
  • Quality 7 / 10
  • Price 8 / 10

PROS

  1. Exceptionally fast for the price
  2. Lowest barrier to entry.
  3. Genuinely beginner-friendly setup

CONS

  1. Open-frame safety burden
  2. No built-in smoke filtration
  3. Working area is on the smaller side

The entry-level laser engraver market has a clear dividing line in 2026: enclosed, desk-safe machines on one side, and open-frame speed demons on the other. The Longer Ray2 plants itself firmly in the second camp—and does so at a price that makes it one of the most accessible ways to get into diode laser engraving without compromising on raw engraving velocity. Starting at $239.99, the Ray2 offers a 12,000 mm/min travel speed and a preassembled frame that gets you burning within minutes of unboxing. But is speed alone enough to recommend it over the growing crop of enclosed alternatives? This review breaks down what the Ray2 does well, where it cuts corners, and how it stacks up against the Sculpfun iCube Ultra—the $299 enclosed machine that has become the default recommendation for desk-safe hobby engraving.

What the Longer Ray2 Brings to the Table

The Longer Ray2 is positioned as a first laser engraver for makers who value working speed and a low entry cost over the polished safety features of enclosed rivals. It ships in two power configurations—7.5W and 15W—both sharing the same 130 × 110 mm work area and the same 12,000 mm/min maximum engraving speed. The 7.5W module carries a 0.08 × 0.08 mm laser spot and can cut 6 mm basswood in a single pass; the 15W variant tightens the spot to 0.06 × 0.06 mm and doubles the one-pass basswood cutting capacity to 10 mm.

The machine arrives largely preassembled, and Longer’s own customer reviews repeatedly highlight how quickly users go from unboxing to their first burn—one reviewer noted experimenting with wood, glass, ceramic, and stone within the first two weeks, while another praised the “easy to assemble, even easier to use” experience. Software support is broad out of the gate: the Ray2 works with LaserGRBL, LightBurn, and Longer’s own LaserBurn, the latter earning comparisons to paid LightBurn features from at least one user.

Where the Ray2 makes its most obvious concession is in safety architecture. It is an open-frame design. That means no built-in enclosure, no integrated smoke filtration, and a practical requirement for laser safety glasses during operation. Longer specifies “Class I laser safety protection,” but in an open-frame context, that designation should be read as a baseline compliance claim rather than the foolproof, goggles-optional safety of a fully enclosed Class 1 system.

Longer Ray2 vs. Sculpfun iCube Ultra: The Comparison That Matters

The iCube Ultra is the most natural point of comparison because it represents the opposite philosophy at nearly the same price: enclosed safety and material versatility over raw open-frame speed. Here is how the two stack up on the specs that actually shape the buying decision.

FeatureLonger Ray2Sculpfun iCube Ultra
Form FactorOpen-frameFully enclosed
Laser Power7.5W or 15W diode12W diode (Single); 12W diode + 1.2W infrared (Dual)
Safety RatingClass 1 claim, but open-frame—goggles recommendedFDA Class 1 enclosed—no goggles required
Working Area130 × 110 mm150 × 150 mm
Max Engraving Speed12,000 mm/min10,000 mm/min
Laser Spot0.08 × 0.08 mm (7.5W); 0.06 × 0.06 mm (15W)0.08 mm (diode); 0.03 mm (infrared)
Smoke ManagementNone built-inBuilt-in smoke filter
Material ReachWood, leather, acrylic, coated metals, etc.300+ materials; Dual adds bare metal, jewelry metals, plastics via IR
Price (2026)$239.99+$299 (Single) / $499 (Dual)
Best ForSpeed-focused makers with a ventilated workspace and safety glassesDesk-safe hobbyists, small-item batch work, and users who need bare-metal marking

 

The Verdict: A Speed-First Starter That Knows Its Lane

The Longer Ray2 is not trying to be the safest or the most versatile laser engraver on the market, and judged on its own terms, it succeeds at what it sets out to do. It is fast, affordable, and remarkably easy to get running for a first-time buyer. The 15W configuration in particular represents strong value for makers who want one-pass cutting capability without crossing the $300 threshold.

The buying decision comes down to a single question: Do you value speed and price over enclosure and material reach? If yes, the Ray2 is one of the most compelling sub-$250 options available. If the answer is no—if the machine needs to be desk-safe without goggles, or if you want to engrave bare metal without a separate fiber laser—then the Sculpfun iCube Ultra is the more complete, if slightly slower, long-term tool. Neither choice is wrong; they simply serve different maker profiles, and the Ray2 serves the speed-and-simplicity profile as well as anything in its class.

SPECS

Product Details

Specification Laser Power: 7.5W / 15W
Engraving Speed: 12,000 mm/min
Working area: 130*110mm
Laser Spot: 0.08*0.08mm
Software: LaserGRBL, LightBurn, LaserBurn
Cutting Ability: 6mm Basswood in one pass

REVIEWS

  • Be the first to add a Review

    Please post a user review only if you have / had this product.

Sculpfun G20
Show More Brands