Brand: Other
Category: Drones
  • 1: Wingspan: 390mm
  • 2: Length: 320mm
  • 3: Material: Drop-resistant PP board
  • 4: Take-off Weight: 58g
  • 5: Wind Resistance: Level 2

Our Rating

The overall rating is based on review by our experts

  • Design 9 / 10
  • Features 8 / 10
  • Performance 9 / 10
  • Connectivity 8 / 10

XFRC X39 390mm Wingspan 2.4G 4CH Dual Brushed Motor DIY PP Board Mini Paper RC Airplane

It has the look of a paper airplane. Yet the X39 is made of polystyrene! With a wingspan of 39 cm and a length of 32 cm, it is equipped with two brushed 720 motors for two 4.6 cm propellers and two 2g servos to operate the ailerons. It is thus similar to a flying wing. The battery is a Lipo 1S 3,7V of 380 mAh 25C. A component all in one takes care of the radio part, the piloting of the motors, the servos and the power supply. The whole weighs 58 grams at takeoff.

So it’s up to you to assemble it. Don’t panic, the puzzle is quite easy to put together, all you need is a little glue. A mode 2 radio control is delivered with the device. According to XFRC, the X39 is able to behave like a wing, flying backwards, with rolls, etc. The price? The device is offered with its radio control at $84.69 at Banggood.


Product Details

Features - Propeller: 46MM special propeller positive and negative propeller
- Remote Control: Four-channel, support for practicing computer simulation flight
- Control Layout: Elevator Aileron Mixing
- Flight skills: route flight + somersault + roll + inverted flight
- Flying Venues: Large indoor venues in the park square
Specification Brand Name: XFRC
Item Name: X39
Wingspan: 390mm
Length: 320mm
Material: Drop-resistant PP board
Take-off Weight: 58g
Wind Resistance: Level 2
Remote Control Distance: About 300 meters
Motor: Double-spinning positive and negative strong magnetic 720 coreless motor
Battery: 3.7V 380mA Lithium battery above 25C
Servo: 2g digital servo 1.0mm plug


  • Be the first to add a Review

    Please post a user review only if you have / had this product.

Disclaimer Note

You can write your own disclaimer from APS Settings -> General -> Disclaimer Note.