Here is a new device pre-equipped with a DJI FPV Air Unit module, for HD video feedback! The GePRC Run HD3 is a small format model, with 3 inch three-bladed propellers. The manufacturer ensures that the propellers do not appear in the image field. The structure is made of carbon with arms with a thickness of 3 mm, and a diagonal from motor to motor of 15.5 cm. The motors are 1507 to 3600KV brushless powered by a 35A ESC 4 in 1 and a Stable Pro F7 flight controller, with an active OSD and flashed with Betaflight.
It is supported by the FPV Air Unit, which includes the camera and the transmission module capable of recording flights in 1080p. The configuration can stop there if you have the DJI radio remote control. If not, you can choose a version of Run HD3 with an XM + or R-XSR radio receiver from FrSky, or Crossfire Nano RX from TBS if you want to go a little further (where the regulations allow). The price ? From $369.99 for the Run HD3 ready to fly at Banggood.
1. Prop out of view
2. Compatibled with DJI Air Unit
3. 720P 120fps FPV
4. GEP-GR1507 3600KV Motor, 4S Lipo(650-850mAh)is recommended.
5. Black Box: Yes; 32Mb
Model: RUN HD 3
Flight Controller System: STABLE PRO F7 BL32 35A
MCU: STM32 F722RET6
MPU: 2 x ICM20689(SPI)
ESC: 35A * 4 BLHeli_32 (Dshot 150/300/600/1200)
Flight Controller: STABLE PRO F722 DUAL BL32 35A
Motors: GR1507 3600KV
Material: 3K Carbon Fiber
Bottom Plate: 3mm
Top Plate: 2mm
Side Plate: 1.5mm
Weight: 201g (Without Battery)
Receiver: DJI/Frsky R-XSR / Frsky XM+ / TBS Nano RX
You can write your own disclaimer from APS Settings -> General -> Disclaimer Note.