Eachine Tyro69

Eachine Tyro69

Brand: Eachine
Category: Drones
  • 1: Main control chip: STM32F411
  • 2: MCU:48MHz EFM8BB21F16G
  • 3: Input Voltage: 2-6S
  • 4: Con. Current: 20A
  • 5: Burst Current: 25A (10S)

Our Rating

The overall rating is based on review by our experts

8.5
  • Design 9 / 10
  • Features 8 / 10
  • Performance 9 / 10
  • Connectivity 8 / 10

Eachine Tyro69 105mm F4 OSD 2.5 Inch 2-3S DIY FPV Racing Drone

Eachine’s Tyro range, you know it well now, they are racers supplied in kit. The advantage? They are offered at a minimum price. The disadvantage? We have to get them up. But the disadvantage can turn into an advantage: mounting your device allows you to know how to repair it… The Tyro69 is a nano racer that looks like a Toothpick: it is ultra light, based on brushless motors and 6.5 cm twin-bladed propellers. The 2 mm thick carbon structure measures 10.5 cm diagonal of the motor motor.

The motors are 1104 to 8600KV brushless motors for the classic two-bladed Toothpick propellers, powered by a 20A DShot600 ESC 4 in 1. The flight controller is an Eachine F411 flashed with Betaflight, with an active OSD. For the video feedback, Eachine chose an AIO Caddx Beetle V2 combo, which combines a 1200TVL camera with a 5.8 GHz transmitter of 25 mW and 48 channels. To take off, you still need to add a radio receiver and a battery. Eachine recommends a Lipo 3S from 300 to 450 mAh, with an XT30 connector.

There is no such thing. The Tyro69 presents its components without fairing to minimize weight gain: the device weighs 47.9 grams without the battery. In the absence of protection, it is therefore necessary to be careful and avoid crashes, which are very likely to be fatal to the FPV combo. Eachine’s Tyro69 will be offered at $69.00 at Banggood.

SPECS

Product Details

Features Main control chip: STM32F411
MCU:48MHz EFM8BB21F16G
Output Power: 25mW
Channel: 48CH
Input Voltage: 2.9-5.5V
Support SmartAudio
VTX Size: 15x14mm
Specification Brand Name: Eachine
Model: Tyro69
Item Name: 2.5 Inch DIY FPV Racing Drone
Version: PNP ( Without Receiver, Battery and Radio Transmitter)
Drone Wheelbase: 105mm
Arm Plate Thickness: 2mm
Max. Propeller: 2.5 Inch
Material: 3K Carbon Fiber & 3D Printed TPU Parts
Weight: 47.9g ( without battery)

Main control chip: STM32F411
IMU: MPU6000
Integrated Betaflight OSD
Firmware: MatekF411
SBUS/ IBUS/ DSMX / UART Shared: UART1-RX
BEC: 5V 2A
WS2812 Led Strip : Yes
Beeper : Yes

KV: 8600KV
Lipo cell: 2-3S
Weight: 4.3g
Color: Orange
Max. Con. Current: 13A
Max. Con. Power: 144W
Configu-ration: 9N/12P
Motor Resistance: 137mΩ
Stator Diameter: 11mm
Stator Thickness: 4mm
Motor Diameter: 13.8mm
Motor Body Length: 11.5mm
Overall Shaft Length: 17mm
Bolt Holes Spacing: 9mm
Bolt Thread: M2

REVIEWS

  • Be the first to add a Review

    Please post a user review only if you have / had this product.

Disclaimer Note

Ratings are based on objective reviews from our users.

HOT DEALS