Geprc CineStyle 4K 144mm

Geprc CineStyle 4K 144mm

Brand: Other
Category: Drones
  • 1: Drone Wheelbase: 144mm
  • 2: Frame Model: GEPRC GEP-CS3
  • 3: Bottom Plate Thickness: 3mm
  • 4: Top Plate Thickness: 3mm
  • 5: Material: Full 3K Carbon Fiber & CNC 7075

Our Rating

The overall rating is based on review by our experts

8.8
  • Design 9 / 10
  • Features 9 / 10
  • Performance 9 / 10
  • Connectivity 8 / 10

Geprc CineStyle 4K 144mm Stable Pro F7 3 Inch FPV Racing Drone

One of the trends in mid-2019 is the devices equipped with Caddx’s Tarsier camera, which allows real-time video feedback and HD recording (see test here). GePRC’s CineStyle 4K is part of this family, since its 3 mm thick carbon frame and 14.4 cm motor diagonal accommodate the famous camera. The images are recorded in 4K, 2.7K or 1080p on a memory card, they are broadcast at the same time via a 5.8 GHz transmitter of 48 channels with a power of 0 mW (Pitmode), 25 mW (the maximum allowed in France), 100 mW, 200 mW, 400 mW or 500 mW ! The polarized antenna is connected with an MMCX connector.

The engines are 1507 to 3600KV brushless motors for 3-inch 3042 three-bladed Gemfan propellers, all powered by a 35A 4-in-1 ESC and a flight controller based on an F7 processor. With one particularity: the presence of 2 gyroscopes to ensure, according to GePRC, a better stability to the device. The CineStyle 4K 144mm is available without a radio receiver, with a FrSky R-XSR or XM+ receiver, or a TBS Nano SE receiver to go further. To power it, GePRC recommends a 650 to 850 mAh 4S battery (not included). The price? It will be offered from $259.99 at Banggood.

SPECS

Product Details

Features Brand Name: Geprc
Model: CineStyle 4K
Item Name: 144mm Stable Pro F7 3 Inch FPV Racing Drone
Drone Wheelbase: 144mm
Material: Full 3K Carbon Fiber & CNC 7075
Frame Model: GEPRC GEP-CS3
Bottom Plate Thickness: 3mm
Top Plate Thickness: 3mm
Net Weight: 163g ( without battery , propellers)
Specification Geprc Stable Pro F7 Stack-
Dual Gyro F7 Flight Controller:
Brand Name: Geprc
Model: Stable Pro F7
Item Name: Dual Gyro F7 Flight Controller
MCU: STM32F722RET6
IMU: 2x ICM20689(SPI)
BlackBox: 32Mb onboard Flash
OSD: BetaFlight OSD w/ AT7456E chip
Baro:NO
BEC Output: 5V@3A
Integrated LC Filter
Input Voltage: 2-6S Lipo
Firmware target: EXF722DUAL
Size: 26x26mm board, 20mm mounting holes (M2)

Geprc Stable Pro F7 Stack-
35A BLheli_32 4in1 ESC:
MCU:STM32F051
Input:2-6s lipo
Constant:35Amps
Burst:45Amps
Dimensions:31*31mm(including the power pads)
Mounting Holes:20*20mm,M2
Supports Dshot1200,Proshot,Oneshot,Multishot
Current meter: Yes
Target: GEPRC-BL32-4IN1

Geprc Stable Pro F7 Stack-
5.8G 48CH 500mW VTX:
Input voltage: 5V
Channel: 48
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
Size: 24 * 26 mm
Mounting Holes Dimension: 20mm x 20mm
Connector type: MMCX Connector
BEC Output: 5V/1A for Camera of FC
Weight: 2.3g
- Traditional button
- IRC Tramp protocol

Geprc GR1507 3600KV Motor:
Brand Name: Geprc
Model: GR1507
Item Name: 1507 3600KV Motor
KV: 3600KV
Configuration:12N14P
Stator Diamter:15mm
Stator Length:7mm
Shaft Diameter:2mm (Hollow)
Motor Dimension :19.6x29.1mm (Dia.xLen)
No.of Cells: 3-4S Lipo
Internal Resistance:104mΩ
Max Current(15S): 35A
Rotor: N52H arc magnets
Bearings: NSK
Base casing: Al 7075
Wire AWG: 24AWG
Weight: 15.5g

Geprc 3042 3-Blade Propeller:
Brand Name: Geprc
Item Name: 3042 3x4.2 3 Inch 3-Blade Propeller
Quantity: 10 CW & 10 CCW
Color: Transparent Grey

Caddx Tarsier 4K 1200TVL Dual Lens Camera:
Dimension: Camera 19x20mm ; DVR 29x29mm (Hole: 20x20mm)
Weight: 18g
Color: Bule
FOV: 4K F2.8, FOV 150 Degree(16/9) ; FPV FOV 165 Degree(4/3)
Lens: Dual Lens F2.8/12Mega Video System: NTSC/PAL
Input: 5-12V

Optional Receiver Version:
PNP Version: Without Receiver
- Frsky XM+ Receiver
- Frsky R-XSR Receiver
- TBS Nano SE Receiver

REVIEWS

  • Be the first to add a Review

    Please post a user review only if you have / had this product.

Disclaimer Note

Ratings are based on objective reviews from our users.

HOT DEALS