Eachine LAL3 145mm

Eachine LAL3 145mm

Brand: Eachine
Category: Drones
  • 1: Wheelbase: 145mm
  • 2: Bottom plate: 3mm
  • 3: Upper plate: 2mm
  • 4: Internal Resistance: 0.0495Ω
  • 5: Motor mount hole size: M2

Our Rating

The overall rating is based on review by our experts

8.3
  • Design 8 / 10
  • Features 9 / 10
  • Performance 8 / 10
  • Connectivity 8 / 10

Eachine LAL3 145mm 3 Inch 3-4S FPV Racing Drone

If you are looking for a big freestyle drone with power to spare and can capture HD footage then the Eachine LAL3 is definitely an option for you. It won’t have the clarity that flying DJI FPV will but it is still pretty solid and a whole lot cheaper. The LAL3 isn’t a drone for flying under the radar. It’s more of a hey look at me over here kind of drone.

It is ensured by a Caddx Turtle V2 camera, capable of providing real-time analog video feedback with a FOV of 155 ° and recording images in FullHD (1920 x 1080 pixels) at 60 frames per second with a FOV of 160°. The video transmitter is an XF5806 in 5.8 GHz compatible with 40 channels, capable of transmitting in 0 mW (pitmode), 25 mW (the maximum authorized in France), 100 mW or 300 mW. A radio receiver (PPM, DSM, SBUS or over UART) must also be added to the set. You also need a battery: Eachine recommends a 3S or a 4S of 450 mAh with an XT30 connector.

The Eachine LAL3 is a 145 mm 3-inch FPV drone that is unlike any other I have flown. Starting with the 4K dual-lens Caddx Tarsier camera this drone is capable of capturing crisp 4K footage onboard. It uses the second camera to provide an FPV feed and is one of the better FPV cameras out there. The 4K camera is good, not quite GoPro good but unless you are trying to produce commercial footage it is probably more than good enough for most pilots. As an added bonus you get an included ND8 filter that fits over both lenses. I typically record in 1080P and find it more than good enough.

SPECS

Product Details

Features Mode: 1408
KV: 3750
Idle current (IO/10V): 0.6A
No.of Cells(Lipo): 3-4S
Peak current: 23A
Max. power: 386.4W
Max. thrust: 600g
Configu-ration:12N14P
Internal Resistance: 0.0495Ω
Stator diameter: 14mm
Stator thickness: 8mm
Height: 29.5mm
Width: φ20mm
Shaft diameter: φ5mm
Motor mount hole size: M2
Install hole distance: 12*12mm
Recommend propeller: 2-3 Inch
Weight: 17g
Specification Brand name: Eachine
Item name: LAL3 3 Inch 3-4S FPV Racing Drone
Take off weight: 175.3g
Wheelbase: 145mm
Bottom plate: 3mm
Upper plate: 2mm
Continue current: 25A
Burst current: 30A (10s)
Input voltage: 3-4S
BEC: NO
Current sensor: NO
Main control chip: STM32F051
Firmware: Blheli_32
Support DSHOT 150/300/600/1200/MULTISHOT/PWM/ONESHOT
Weight: 3.8g
Installation hole: 20x20mm/φ2
Dimension: 31*29mm

REVIEWS

  • Be the first to add a Review

    Please post a user review only if you have / had this product.

Disclaimer Note

You can write your own disclaimer from APS Settings -> General -> Disclaimer Note.

HOT DEALS