Brand: Other
Category: Drones
  • 1: 116mm 4S 3INCH
  • 2: Toothpick BNF XM+
  • 3: RUNCAM NANO 5.8G
  • 4: RHCP GOKU411
  • 5: BLHELI 13A IRC Tramp VTX

Our Rating

The overall rating is based on review by our experts

  • Design 7 / 10
  • Features 8 / 10
  • Performance 7 / 10
  • Connectivity 8 / 10

FLYWOO XBOT3/ XBOT3-HD 116mm 4S 3INCH FPV Racing RC Drone

The manufacturer Flywoo constitutes a rather interesting range of racers. The Xbot3 model is a nano racer type device since it is equipped with 3 inch propellers for a motor-to-motor diagonal of 11.6 cm. It is similar to a Toothpick with its narrow 2.5 mm thick motor arms and its two-bladed propellers. But it is a higher category machine… The look of its central fairing, all in height, is interesting, with a front piece which protects the electronics inside and guides the radio antennas.

The Xbot3 is based on a GOKU4111 flight controller based on an F4 processor, with an active OSD, flashed with Betaflight. To drive the motors, it relies on a 13A BLheli_S DShot600 ESC 4 in 1. Its motors are 1205.5 to 5800KV brushless for Gemfan 3018 propellers. Flywoo has placed a FrSky XM + radio receiver on board.

Flywoo offers two versions of the Xbot3. The first is equipped with a classic FPV camera, the Runcam Nano 2. The second is the Xbot3-HD, intended to record flights in HD, with a RunCam Split 3 Nano camera, a hybrid capable of ensuring analog video return and record images in 1080p at 60 frames per second. The video transmitter is a 5.8 GHz model compatible with 48 channels, with a power of 0 mW (pitmode), 25 mW (the maximum authorized in France), 50 mW, 100 mW, 200 mW or 450 mW. The Xbot3 weighs 70 grams without battery, the Xbot3-HD weighs 70 grams.


Product Details

Features Frame: FLYWOO XBOT3/XBOT3-HD
Carbon:Full 3K carbon fiber
Motor to motor: 116mm
Bottom plate: 2.5mm
Specification Brand Name: FLYWOO
Flight Controller: GOKU411
Camera: RUNCAM NANO2/ RunCam Split 3 Nano 1080P 60fps HD
Motor to motor: 116mm (3inch PORP)
Propeller: GF 3018-2MM (4 pairs)
Antenna: RG178 5.8g RHCP
Motor to motor: ROBO1202.5 5800KV (M2 Shaft)
Weight: 59g/69g HD without battery
Receiver: Frsky XM+

Flight Controller: GOKU411 STACK
MCU: STM32F411
Gyro: MPU6000
OSD: BetaFlight OSD w/ AT7456E chip
Firmware target: FLYWOO411


  • Be the first to add a Review

    Please post a user review only if you have / had this product.

Disclaimer Note

Ratings are based on objective reviews from our users.