The VTOLs, these half-aircraft-multirotor hybrids, are struggling to find their place among consumer devices. However, the Chinese manufacturer XK has unveiled a competitor (or a copy?) of Horizon Hobby’s Convergence and Mini Convergence. It is based on 3 propellers. The front ones tilt from horizontal (takeoff) to vertical (cruise flight) with the help of 9g servos. The motors are brushless 1370. The aircraft’s fins are controlled by 4.3g servos.
The XK X450 is delivered turnkey, with a 3S 1000 mAh 20C battery, which provides an autonomy of 11 minutes in multirotor flight, and 15 minutes in airplane flight. The remote control (mode 2, gas on the left) is provided – but there is a way to do without it, it operates according to the Futaba S-FHSS standard. It allows you to choose the flight mode: 6G for a stabilized mode, Multirotor for takeoff, landing and slow flights, Vertical to switch to cruise flight. The X450 will be offered by the Banggood store at $129.99.
It adopts impact-resistant engineering EPO engineering materials, built-in carbon fiber rod reinforcement, and very impact.
It adopts 3 1370 brushless motors, high-efficiency blad'es, full power, high-precision and high-torque 9g digital steering gear 2PCS,
which is used to pull the front motor. High-precision 4.3g digital steering gear controls the aircraft's rudder surface.
The aircraft adopts 6-axi's gyroscope with air pressure and high altitude, 3D/6G mode conversion, suitable for different scenes,
and is more suitable for beginners to advance practice flight.
The aircraft can take off and land vertically, vertical landing, air mode conversion, and also has a combination of beginner mode and aerobatic mode, effectively solving the problem of small flight space, unable to take off, and beginners do not have the ability to take off the flight take-off and cannot take off smoothly.
Aircraft has multiple flight modes
Multi-rotor mode Multirotor flight (four-axis), the aircraft can fly vertically like a quadcopter and helicopter.
Hover flight and forward and backward left and right side fly and spin flight and a one-button take-off / one-button landing function.
Vertical flight vertical crane mode, aircraft air-to-air conversion mode, set up by the horizontal flight mode,
can fly vertically like the X520 and quadcopters and helicopters, hover flight, forward and backward, left and right side and spin flight.
6G plane flight mode, the aircraft is flat and take off vertically, one-key conversion level flight into 6G fixed height self-stabilization mode,
realize vertical flight to horizontal flight seamless docking, gyroscope self-stabilization, heading lock, very suitable for beginners Fixed-wing mode practice flight.
Outdoor stunt mode, after the aircraft has an airborne horizontal flight, the switch switches the 3D position,
and the aircraft enters the 3D trick mode (3D lock mode), and easily makes the acrobatic roll and death stunt and other special effects.
High capacity Large 11.1V lithium polymer battery with a flight time of 13 minutes or more.
Customers can choose 720P HD image transmission, 2.4G WIFI, the camera can adjust the angle,
vertical shooting and 30 degrees before and after shooting.
Follow-up GPS version Increases out of control and returns to the air. One-button return to low-voltage return and follow-up functions.
Item Name: A'VIATOR
Item No.: X450
Version: RTF(ready to fly)
Size: 450 X 445 X 107mm
Motor: 1370 X 3 Brushless
Servo: 2 X 5g, 4.3g(Digital Servo)
Battery: 3S 11.1V 1000mAh 20C Li-po (Included)
Flying Time: About 11-12mins(Vertical flight time)
15-16mins (Horizontal flight time)
Charging Time: About 50-60mins
Transmitter Battery: 1.5V 6 X AA(Not Included)
R/C Distance: About 300m
You can write your own disclaimer from APS Settings -> General -> Disclaimer Note.