Drones

Just a few years ago, drones were expensive and inaccessible to a wide range of people. However, every year more drones appear on the shelves at affordable prices. And all this is due to the growing popularity of multi-copters (having 3 or more rotors). The new hobby quickly turned into a whole industry, which is projected to only develop. Amateur drones are radio-controlled multi-rotor systems with a signal reception distance of up to 200 meters. Suitable for pilots of any level. Unlike professional UAVs, there are no GPS modules in them, collector motors are used, they can not be used to lift payloads. Amateur UAVs are designed for entertainment and can shoot amateur photos / videos. They will be a great gift for children and adults, as they are made qualitatively and do not require flying skills. The best solutions are offered by the companies: Syma, JJRC, Hubsan. Drones for shooting - multi-rotor systems on the radio control, which are designed to lift payload. They can be used for amateur and professional photo / video aerial photography. Professional drones are equipped with auto-return function in case of loss of radio signal, have GPS modules, can fly along the route and hang at a point. The power system of professional Quad-rocopters is built on powerful brushless motors, which allows them to fly in windy weather without loss of flight qualities. The best solutions are offered by the companies: DJI, Yuneec, Autel Robotics, 3DR, GoPro, Walkera. Also there are drones (150 - 250 class), which are intended for FPV flights (first person flight) through FPV points. These are used in competitions, special - racing drones.
    • 1: Size: 450 X 445 X 107mm
    • 2: Channel: 6CH
    • 3: Motor: 1370 X 3 Brushless
    • 4: Servo: 2 X 5g, 4.3g(Digital Servo)
    • 5: Battery: 3S 11.1V 1000mAh 20C Li-po (Included)
    8.3
    • 1: GR1103 8000KV
    • 2: MCU: STM32F411
    • 3: Mounting holes: 16mm*16mm
    • 4: Input voltage 2-4S LIPO
    • 5: Firmware target: MATEKF411
    8.5
    • 1: Battery: 7.6V / 1800mah
    • 2: Camera: front camera 1080P / 720P at lens
    • 3: Channel: 4-Channels
    • 4: Remote Control: 2.4GHz Wireless Remote Control
    • 5: Real-time image transmission distance: 70 meters
    9.0
    • 1: Ultra-light 4 inch toothpick frame
    • 2: High-Quality TPU 3D printed canopy with exquisite design
    • 3: 140 grams without battery weight
    • 4: Equipped with Caddx Turbo EOS2
    • 5: The flight controller uses STM32F411
    8.3
    • 1: 120 Degree Wide Angle Camera
    • 2: Resolution 6K: 4800*2700
    • 3: Frame Rate: 25 fps
    • 4: Distance: 500m
    • 5: Capacity: 1450 mAh
    8.8
    • 1: Using GEPRC-12A-F4 FC system
    • 2: No Propellers in view
    • 3: The Newly Developed GR8 Remote Controller
    • 4: High-Quality FPV Goggle
    • 5: High definition 800 * 480px
    8.5
    • 1: Wheelbase: 100mm
    • 2: Motor: 1204-5200kv
    • 3: Blade: HQProp T2x2x4
    • 4: VTX: 25-100-200mw 48CH VTX
    • 5: Camera: Caddx ANT 1200TVLFPV
    8.3
    • 1: AI Gesture Control
    • 2: Follow Mode
    • 3: GPS Optical Flow Altitude Hold
    • 4: Headless
    • 5: One Key Takeoff
    8.3
    • 1: 1080P High Definition Camera
    • 2: 20 minutes flight time
    • 3: Rotor size: 185mm (7.3 inches )
    • 4: Max current: 16A
    • 5: Max Flight radius:300m
    8.5
    • 1: Wheelbase: 300mm
    • 2: Arm Plate Thickness: 4mm
    • 3: TOP and Bottom Plate Thickness: 2mm
    • 4: Side Plate Thickness: 2mm
    • 5: Material: 3k Carbon Fiber
    9.0
    • 1: Wheelbase: 280mm
    • 2: Effective Pixels: 4K 12MP
    • 3: Video Frames: 25FPS
    • 4: Sensor: 1/3.2
    • 5: Max. Stream: 13Mbps
    8.0
    • 1: GPS positioning mode
    • 2: Optional 720P / 2.4G WiFi 1080P
    • 3: Waypoint flight mode
    • 4: With 7.4V 1200mAh battery
    • 5: One Key Takeoff /Landing
    9.0
    • 1: 110mm 3-4S FPV
    • 2: Motor: AMAX 1303 4800kv
    • 3: Wheelbase: 110mm
    • 4: Camera: Runcam Nano2
    • 5: Antenna: Copper pipe antenna
    8.5
    • 1: 6 minutes of flight
    • 2: Powerful and smoothly
    • 3: Betaflight OSD support
    • 4: Camera Angle adjustable
    • 5: Compatible with FrSky D8
    8.5
    • 1: Motor: BrotherHobby VY 2004-3150KV
    • 2: Camera: Caddx Ratel 2.1MM Lens
    • 3: Receiver: Frsky XM+
    • 4: Antenna: Hyperbola 5.8GHz, 2.5Dbi Gain
    • 5: Take off weight: 247g
    8.5
    • 1: 36 gram 2s brushless 85mm whoop
    • 2: New AIO 4in1 CrazybeeX flight controller
    • 3: Smooth and powerful
    • 4: CADDX ANT Lite Camera
    • 5: Motor Mode: 1102 10000KV
    8.3
    • 1: Four-axis structure
    • 2: Built-in barometer
    • 3: Modular design
    • 4: One-click 360-degree roll feature
    • 5: 3 speed modes
    7.5
    • 1: Almost all parts are injection molded
    • 2: Very easy to disassemble and install
    • 3: Efficient power configuration
    • 4: No Propellers in view
    • 5: SMO camera
    8.3
    • 1: Built-in Gyro: 6 Axis Gyro
    • 2: Level: Beginner Level
    • 3: Remote Control: 2.4GHz Wireless Remote Control,WiFi Remote Control
    • 4: Radio Mode: Mode 2 (Left-hand Throttle),WiFi APP
    • 5: Compatible with Additional Gimbal: Yes
    8.5
    • 1: Input Voltage: 2S LiPo battery
    • 2: BAT: 7 - 26V, BEC 5V - 1A
    • 3: Firmware: BLHeli - S
    • 4: Constant Current: 20A
    • 5: Horizontal Resolution: 800TVL
    8.3
    • 1: Wheelbase: 85mm
    • 2: New Crazybee F4 PRO V3.0
    • 3: Powerful and smoothly
    • 4: Camera Angle adjustable
    • 5: Camera Angle adjustable
    8.8
    • 1: Foldable structure
    • 2: 3 axis gimbal
    • 3: 4K HD resolution
    • 4: Image tracking
    • 5: Line fly mode
    8.8
    • 1: Camera: CADDX Turtle V2
    • 2: VTX: TBS UNIFY 5V
    • 3: Antenna: Copper pipe antenna
    • 4: Propeller: 3 inch.
    • 5: ESC: MAMBA F25 MK2 /25A 4S ESC Dshot 600
    8.0
    • 1: 65mm whoop with 35mm propellers
    • 2: Smooth and powerful
    • 3: Compatible for 1S Lipo/LIHV
    • 4: Camera Angle adjustable
    • 5: The lightest 1/3 CMOS 800TVL Camera
    8.5
    • 1: MCU: STM32F411CEU6
    • 2: Sensor: MPU-6000
    • 3: Store: Onboard black box
    • 4: Board size: 21x21mm
    • 5: Power supply: 2-4S battery input
    8.3
    • 1: 1404 2750kv Motor
    • 2: Main control chip: STM32F405
    • 3: 20A 3-6S 4IN1 ESC
    • 4: VISTA KIT/Nebula Nano V2
    • 5: GEMFAN4024 2-Bladed Prop
    8.3
    • 1: Voltage: 3-6S
    • 2: F411 AIO PRO Flight Controller
    • 3: Gemfan 5125 propellers
    • 4: Frame: Funny5 Frame
    • 5: Camera: Caddx ratel2 1200TVL
    8.3
    • 1: Size: 39 x 39 x 7CM ( unfolded ), 13.9 x 7.3 x 5.1CM ( folded )
    • 2: RC drone battery: 11.1V 1500mAh LiPo
    • 3: Flying time: about 20mins
    • 4: Charging time: about 180mins
    • 5: Remote control battery: 300mAh LiPo
    8.5
    • 1: Operating voltage range: 6.0 ~ 8.4V
    • 2: Operating current: 190mA@7.4V
    • 3: Backlit LCD resolution: 128 x 64
    • 4: Micro USB interface: supports 2S Li-battery balancing charge
    • 5: Number of channels: 24 channels
    8.8
    • 1: Camera: 1080P
    • 2: FPV Frequency: 5G WIFI
    • 3: Flying Time: About 20mins
    • 4: Transmission distance: More than 500 meters
    • 5: Battery: 7.6V 2200mAh Li-po(Included)
    8.8

HOT DEALS