Drones
Just a few years ago, drones were expensive and inaccessible to a wide range of people. However, every year more drones appear on the shelves at affordable prices. And all this is due to the growing popularity of multi-copters (having 3 or more rotors). The new hobby quickly turned into a whole industry, which is projected to only develop.
Amateur drones are radio-controlled multi-rotor systems with a signal reception distance of up to 200 meters. Suitable for pilots of any level. Unlike professional UAVs, there are no GPS modules in them, collector motors are used, they can not be used to lift payloads. Amateur UAVs are designed for entertainment and can shoot amateur photos / videos. They will be a great gift for children and adults, as they are made qualitatively and do not require flying skills.
The best solutions are offered by the companies:
Syma,
JJRC,
Hubsan.
Drones for shooting - multi-rotor systems on the radio control, which are designed to lift payload. They can be used for amateur and professional photo / video aerial photography. Professional drones are equipped with auto-return function in case of loss of radio signal, have GPS modules, can fly along the route and hang at a point. The power system of professional Quad-rocopters is built on powerful brushless motors, which allows them to fly in windy weather without loss of flight qualities.
The best solutions are offered by the companies:
DJI, Yuneec, Autel Robotics, 3DR, GoPro, Walkera.
Also there are drones (150 - 250 class), which are intended for FPV flights (first person flight) through FPV points. These are used in competitions, special - racing drones.
-
- 1: Ultra-light weight
- 2: Caddx baby turtle V2 1080P Caemra
- 3: Reliable electronic equipment, reducing weight
- 4: High-definition TPU printing
- 5: Full 3K carbon plate
- View Details →
8.5
-
- 1: Camera: Caddx Vista Nebula
- 2: Motor to motor:79mm
- 3: Antenna:5.8G
- 4: Motor:GR1103 8000KV
- 5: Flight Controller:GEP-12A-F4 AIO
- View Details →
8.0
-
- 1: Using GEPRC-12A-F4 FC system
- 2: No Propellers in view
- 3: The Newly Developed GR8 Remote Controller
- 4: High-Quality FPV Goggle
- 5: High definition 800 * 480px
- View Details →
8.5
-
- 1: Portable and lightweight
- 2: Variety expansion
- 3: Adjustable Tape for easy adjustment
- 4: Long distance transmission
- 5: Independent communication
- View Details →
8.5
-
- 1: Wheel base: 102mm
- 2: Power input: 3S-4S lipo battery
- 3: Motor: 1105 4500KV brushless motor
- 4: ESC: 4in1 BLheliS 15A
- 5: Camera: Runcam split mini 3
- View Details →
8.5
-
- 1: 41 gram 1-2s brushless Toothpick drone
- 2: New AIO 4in1 CrazybeeX flight controller
- 3: CADDX ANT 1200tvl Camera
- 4: New 1202.5 brushless motor
- 5: XT30 connector
- View Details →
8.5
-
- 1: Ultra-lightweight 3.5-inch
- 2: HD video transmission
- 3: Integrated ExpressLRS SPI receiver
- 4: Frsky SPI D8/D16 receiver
- 5: High efficiency EX1404 power system
- View Details →
7.3
-
- 1: KV options: KV7000
- 2: Shaft Diameter: Φ1.5mm
- 3: Stator Diamter:11mm
- 4: Sensor: MPU-6000 (SPI connection)
- 5: Power Supply: 2-4S battery input (DC 7-17V)
- View Details →
8.5
-
- 1: SPI BUS receiver Frsky D8 compatible
- 2: Compatible Non EU transmitter D8 model
- 3: Channels: 8ch
- 4: Failsafe support
- 5: Built-in 5.8G VTX
- View Details →
9.0
-
- 1: Crazybee F4 PRO V2.1
- 2: The lightest 1102 brushless motor
- 3: Light ,Powerful and smoothly
- 4: AIO 5.8G 40CH 25mW VTX
- 5: 2mm carbon fiber frame
- View Details →
8.5
-
- 1: MCU: STM32F411
- 2: BEC Output: 5V@2A
- 3: Input: 2-4S LiPo
- 4: Supports Dshot600, Proshot, Oneshot125, Multishot
- 5: Motor shaft diameter: 1.5mm
- View Details →
8.3
-
- 1: Drone F4 OSD 12A 0803 Motor
- 2: Power Supply: 2-3S LiPo
- 3: Carbon Fiber Plate: 1.5mm+1.0mm
- 4: Ducts: Nylon Plastic
- 5: Wheelbase: 92mm
- View Details →
8.3
-
- 1: Power Supply: 2-3S
- 2: Weight: 57g
- 3: MCU: STM32 F4
- 4: Gyroscope: MPU6000
- 5: BEC: 5V/2A
- View Details →
8.5
-
- 1: Max Prop: 65mm (2.5inch)
- 2: Wheelbase: 108mm
- 3: Thickness of Carbon Fibre: 2.0mm
- 4: Material of Ducts: N/A
- 5: Material of Canopy: Enhanced Nylon Plastic
- View Details →
8.3
-
- 1: Carbon Fiber Plate: 2.5mm
- 2: Canopy: Nylon Plastic
- 3: Power Supply: 2-3S LiPo
- 4: Estimated Flight Time: 4-7 minutes
- 5: Wheelbase: 120mm
- View Details →
8.5
-
- 1: Frequency: 2.4G
- 2: Channel: 4CH
- 3: Distance:About 50m
- 4: WIFI Control
- 5: Model Battery: 3.7V 650mAh
- View Details →
8.3
-
- 1: Advanced altitude holding function
- 2: Bright LED lights
- 3: Headless mode and speed select
- 4: Flexible Shooting Angles
- 5: One-key return
- View Details →
8.5
-
- 1: CPU: STM32F405RGT6, dual 8K
- 2: MPU: MPU6000 - SPI
- 3: Input voltage: 2 - 4S Lipo battery
- 4: Output power: 25mW / 100mW / 200mW switchable
- 5: Video system: NTSC / PAL
- View Details →
8.0
-
- 1: Strong protection with EVA protective cover
- 2: 186° duct design
- 3: GOPRO cameras
- 4: Type: 3 Inch Cinewhoop Frame
- 5: Wheelbase:136mm
- View Details →
8.3
-
- 1: 90mm Frame Kit
- 2: F7 Flight Controller AIO 13A 4in1 ESC
- 3: 1106 3800KV Motor
- 4: Emax AVAN Micro 2 Inch 4-Blade propeller
- 5: CADDX VISTA Nebula Nano
- View Details →
8.3
-
- 1: CPU: STM32F411CEU6
- 2: Input Voltage: 2-4S Lipo
- 3: BEC Output: 5V 2A
- 4: Input Voltage: 2-4S Lipo
- 5: Installing Hole: 16x16mm, M2
- View Details →
8.8
-
- 1: Rekon 6 LR Frame
- 2: Zeus F722 mini Flight Controller
- 3: Zeus 28A BL_S 4in1 ESC
- 4: Rekon 2105.5 1500KV Motor
- 5: GEMFAN 6026 6 Inches 2-Blades Propeller
- View Details →
8.8
-
- 1: Material: 3K carbon fiber
- 2: Top plate thickness: 2mm
- 3: Bottom plocte thickness: 2mm
- 4: Middle plate thickness: 2mm
- 5: Camera side panel thickness: 1.5mm
- View Details →
8.5
-
- 1: Pre-installed LEDs and GPS
- 2: No Props in view
- 3: Adjustable camera mount angle
- 4: Capacitor slot to hide the capacitor for a neater look
- 5: A complete range of TPU parts
- View Details →
8.5
-
- 1: Horizontal Resolution:1200 TVL
- 2: TV System:NTSC / PAL option
- 3: IMAGE:16:9
- 4: Electronic Shutter:PAL: 1/50-100,000
- 5: NTSC: 1/60-100,000
- View Details →
8.5
-
- 1: Strong protection with EVA protective cover
- 2: 186° duct design
- 3: GOPRO cameras
- 4: Type: 3 Inch Cinewhoop Frame
- 5: Wheelbase:136mm
- View Details →
8.3
-
- 1: Arm Thickness: 6mm
- 2: Standoff Height: 28mm
- 3: MPU: ICM20608 (32K) & MPU6000-SPI
- 4: CPU: STM32F745VGT6, 32K+16K
- 5: LED Output: 5V@3A
- View Details →
8.5
-
- 1: 5mm full 3k carbon fiber twill
- 2: 35A Dshot1200 Quadcopter
- 3: Output Power: 0.5mW, 25mW, 200mW, 500mW, 800mW
- 4: Atlatl HV V2 video transmitter
- 5: RunCam Swift Micro FPV camera
- View Details →
8.5
-
- 1: Kakute F4 V2 Mini Flight Controller
- 2: Tekko32 F3 4in1 35A mini ESC 4In1
- 3: T-Motor F1404 3800KV Brushless Motor
- 4: Gemfan D63-5B Propeller
- 5: Drone Wheelbase: 105.5mm
- View Details →
8.3
-
- 1: MCU: STM32F745 32-bit processor
- 2: IMU: MPU6000 (SPI)
- 3: Barometer: BMP280
- 4: USB VCP Driver
- 5: 6 hardware UARTS
- View Details →
8.3