Drones

Just a few years ago, drones were expensive and inaccessible to a wide range of people. However, every year more drones appear on the shelves at affordable prices. And all this is due to the growing popularity of multi-copters (having 3 or more rotors). The new hobby quickly turned into a whole industry, which is projected to only develop. Amateur drones are radio-controlled multi-rotor systems with a signal reception distance of up to 200 meters. Suitable for pilots of any level. Unlike professional UAVs, there are no GPS modules in them, collector motors are used, they can not be used to lift payloads. Amateur UAVs are designed for entertainment and can shoot amateur photos / videos. They will be a great gift for children and adults, as they are made qualitatively and do not require flying skills. The best solutions are offered by the companies: Syma, JJRC, Hubsan. Drones for shooting - multi-rotor systems on the radio control, which are designed to lift payload. They can be used for amateur and professional photo / video aerial photography. Professional drones are equipped with auto-return function in case of loss of radio signal, have GPS modules, can fly along the route and hang at a point. The power system of professional Quad-rocopters is built on powerful brushless motors, which allows them to fly in windy weather without loss of flight qualities. The best solutions are offered by the companies: DJI, Yuneec, Autel Robotics, 3DR, GoPro, Walkera. Also there are drones (150 - 250 class), which are intended for FPV flights (first person flight) through FPV points. These are used in competitions, special - racing drones.
    • 1: Wheelbase: 111mm
    • 2: Size: 155*173*38mm
    • 3: Weight: 104g
    • 4: Motor: 1104 5400KV
    • 5: Camera: Runcam Nano2
    • 6: Prop: 2540 3-bladed
    8.5
    • 1: MCU: STM32F411CEU6
    • 2: Sensor: MPU-6000
    • 3: Store: Onboard black box
    • 4: Board size: 21x21mm
    • 5: Power supply: 2-4S battery input
    • 6: Built-in Current meter Max 70A
    8.3
    • 1: MCU: STM32F411CEU6
    • 2: Sensor: MPU-6000
    • 3: Onboard 4 In 1 ESC
    • 4: SBUS Receiver
    • 5: Protocol: DSM2/DSMX Compatible
    • 6: Frequency: 40CH
    8.5
    • 1: Wheelbase: 120mm
    • 2: Size: 144mm *164mm * 46mm
    • 3: Weight: 97.25g
    • 4: Sensor: MPU-6000
    • 5: Motor Mode: GL1204 KV4500
    • 6: RGB LED dual lights
    8.3
    • 1: Newly adopted 1204 motor
    • 2: Caddx Tarsier 4K Camera & DVR ready
    • 3: Camera Angle adjustable
    • 4: VTX power switchable 25mw~200mw
    • 5: Smartaudio ready
    • 6: Compatible 3s-4s Lipo / LIHV
    8.5
    • 1: Flight controller: Play F4 Whoop
    • 2: Version: F411CEU6
    • 3: Sensor: MPU-6000
    • 4: Board Size: 28.5 * 28.5MM
    • 5: Current: 5A continuous peak 7A
    • 6: Onboard 4in1 ESC MCU upgraded to EFM8BB21
    8.5
    • 1: Use Play F4 flight controller
    • 2: Prepare Smartaudio
    • 3: Support Betaflight adjustment
    • 4:
    • 5:
    • 6:
    8.0
    • 1: 155mm FPV
    • 2: MCU: STM32 F722RET6
    • 3: Material: 3K Carbon Fiber
    • 4: Side Plate: 1.5mm
    • 5: Weight: 247g
    • 6: FPV System: Caddx Vista HD
    8.5
    • Feature 1: Wheelbase: 95mm
    • Feature 2: Camera: RunCam Hybrid 4K
    • Feature 3: Motors: GR1105 5000KV
    • Feature 4: Recommend battery: 3-4S 450-550mAh Batter
    • Feature 5: Weight: 4s version 99g (Without battery)
    • Feature 6: Propeller: 2inch
    8.5
    • Feature 1: GR1103 8000KV
    • Feature 2: MCU: STM32F411
    • Feature 3: Mounting holes: 16mm*16mm
    • Feature 4: Input voltage 2-4S LIPO
    • Feature 5: Firmware target: MATEKF411
    • Feature 6: Weight: 2.5g
    8.5
    • 1: New camera damping system
    • 2: Brand-new exclusive pusher frame
    • 3: Low noise optimization
    • 4: Long range flight
    • 5: Low center of gravity design
    • 6: Adjustable lens angle
    8.5
    • Feature 1: Model:STABLE PRO F7 35A
    • Feature 2: MCU: STM32F722RET6
    • Feature 3: IMU: 2x ICM20689(SPI)
    • Feature 4: BlackBox: 32Mb onboard Flash
    • Feature 5: Firmware target: EXF722DUAL
    • Feature 6: Input voltage: 5V
    8.3
    • Feature 1: 3-inch propeller with guard
    • Feature 2: Dual Camera System
    • Feature 3: STABLE V2 F4 30A SYSTEM
    • Feature 4: 500mW VTX Power
    • Feature 5: Better airflow, Higher flight efficiency
    • Feature 6: High Efficiency Motor
    8.3
    • Feature 1: Drone Wheelbase: 144mm
    • Feature 2: Frame Model: GEPRC GEP-CS3
    • Feature 3: Bottom Plate Thickness: 3mm
    • Feature 4: Top Plate Thickness: 3mm
    • Feature 5: Material: Full 3K Carbon Fiber & CNC 7075
    • Feature 6: Net Weight: 163g ( without battery , propellers)
    8.8
    • 1: Wheelbase: 174mm
    • 2: MCU: STM32F411
    • 3: Type-C USB interface
    • 4: OSD: BetaFlight OSD w/ AT7456E chip
    • 5: Power input: 4S LiPo
    • 6: Motors: GR1404 2750KV
    8.3
    • 1: Motor to Motor: 156mm
    • 2: FC: SPAN F722 HD
    • 3: MCU: STM32F722
    • 4: OSD: BetaFlight OSD w
    • 5: Camera: Caddx Ratel V2
    • 6: Motors: 1408 2500KV
    8.5
    • 1: Flight Controller: GEP-20A-F4 AIO
    • 2: Camera: Caddx Turbo Eos2
    • 3: Motor to motor: 153mm
    • 4: Propeller: HQ4*4.3*3 V1S
    • 5: Antenna: RG178 5.8g RHCP
    • 6: Weight: 136g without battery
    8.5
    • Feature 1: Wheelbase: 224mm
    • Feature 2: Material: 3K Carbon Fiber
    • Feature 3: Arms plate : 5mm
    • Feature 4: Side plate : 2.5mm
    • Feature 5: Top plate : 2.5mm
    • Feature 6: Bottom plate : 2.5mm
    8.5
    • 1: 2-inch Props guards
    • 2: GEP-20A-F4 AIO
    • 3: High efficiency power system
    • 4: Motor GR1204 5000KV
    • 5: 2 inch 4-blades propeller
    • 6: Light weight up to 148g
    8.3
    • 1: Prop out of view
    • 2: Compatibled with DJI Air Unit
    • 3: 720P 120fps FPV
    • 4: GEP-GR1507 3600KV Motor
    • 5: 4S Lipo(650-850mAh)is recommended
    • 6: Black Box: Yes; 32Mb
    8.3
    • Feature 1: Ultra-light weight
    • Feature 2: Caddx baby turtle V2 1080P Caemra
    • Feature 3: Reliable electronic equipment, reducing weight
    • Feature 4: High-definition TPU printing
    • Feature 5: Full 3K carbon plate
    • Feature 6: Drone Wheelbase: 118mm
    8.5
    • 1: Camera: Caddx Vista Nebula
    • 2: Motor to motor:79mm
    • 3: Antenna:5.8G
    • 4: Motor:GR1103 8000KV
    • 5: Flight Controller:GEP-12A-F4 AIO
    • 6: Gyro:MPU6000
    8.0
    • 1: Using GEPRC-12A-F4 FC system
    • 2: No Propellers in view
    • 3: The Newly Developed GR8 Remote Controller
    • 4: High-Quality FPV Goggle
    • 5: High definition 800 * 480px
    • 6: Sensitive 5.8G receiver
    8.5
    • 1: Portable and lightweight
    • 2: Variety expansion
    • 3: Adjustable Tape for easy adjustment
    • 4: Long distance transmission
    • 5: Independent communication
    • 6: Any GPS drone capable
    8.5
    • 1: Wheel base: 102mm
    • 2: Power input: 3S-4S lipo battery
    • 3: Motor: 1105 4500KV brushless motor
    • 4: ESC: 4in1 BLheliS 15A
    • 5: Camera: Runcam split mini 3
    • 6: Propller: 2inch 4blade
    8.5
    • 1: 41 gram 1-2s brushless Toothpick drone
    • 2: New AIO 4in1 CrazybeeX flight controller
    • 3: CADDX ANT 1200tvl Camera
    • 4: New 1202.5 brushless motor
    • 5: XT30 connector
    • 6: Compatible with Insta360 Go Camera
    8.5
    • Feature 1: KV options: KV7000
    • Feature 2: Shaft Diameter: Φ1.5mm
    • Feature 3: Stator Diamter:11mm
    • Feature 4: Sensor: MPU-6000 (SPI connection)
    • Feature 5: Power Supply: 2-4S battery input (DC 7-17V)
    • Feature 6: Built-in Current meter Max 70A
    8.5
    • Feature 1: SPI BUS receiver Frsky D8 compatible
    • Feature 2: Compatible Non EU transmitter D8 model
    • Feature 3: Channels: 8ch
    • Feature 4: Failsafe support
    • Feature 5: Built-in 5.8G VTX
    • Feature 6: Built-in SPI Frsky/Flysky receiver
    9.0
    • Feature 1: Crazybee F4 PRO V2.1
    • Feature 2: The lightest 1102 brushless motor
    • Feature 3: Light ,Powerful and smoothly
    • Feature 4: AIO 5.8G 40CH 25mW VTX
    • Feature 5: 2mm carbon fiber frame
    • Feature 6: Compatible both for 2s-3s Lipo/LIHV
    8.5
    • 1: MCU: STM32F411
    • 2: BEC Output: 5V@2A
    • 3: Input: 2-4S LiPo
    • 4: Supports Dshot600, Proshot, Oneshot125, Multishot
    • 5: Motor shaft diameter: 1.5mm
    • 6: Support voltage: 3.7-16.8v
    8.3

HOT DEALS