Drones

Just a few years ago, drones were expensive and inaccessible to a wide range of people. However, every year more drones appear on the shelves at affordable prices. And all this is due to the growing popularity of multi-copters (having 3 or more rotors). The new hobby quickly turned into a whole industry, which is projected to only develop. Amateur drones are radio-controlled multi-rotor systems with a signal reception distance of up to 200 meters. Suitable for pilots of any level. Unlike professional UAVs, there are no GPS modules in them, collector motors are used, they can not be used to lift payloads. Amateur UAVs are designed for entertainment and can shoot amateur photos / videos. They will be a great gift for children and adults, as they are made qualitatively and do not require flying skills. The best solutions are offered by the companies: Syma, JJRC, Hubsan. Drones for shooting - multi-rotor systems on the radio control, which are designed to lift payload. They can be used for amateur and professional photo / video aerial photography. Professional drones are equipped with auto-return function in case of loss of radio signal, have GPS modules, can fly along the route and hang at a point. The power system of professional Quad-rocopters is built on powerful brushless motors, which allows them to fly in windy weather without loss of flight qualities. The best solutions are offered by the companies: DJI, Yuneec, Autel Robotics, 3DR, GoPro, Walkera. Also there are drones (150 - 250 class), which are intended for FPV flights (first person flight) through FPV points. These are used in competitions, special - racing drones.
    • 1: 4K HD Camera & Two-axis Gimbal
    • 2: Dual GPS Positioning
    • 3: Max. Descent Speed: 1.5m/s
    • 4: Max. Limit Height: 4000m
    • 5: Multiple Flight Modes
    8.5
    • 1: Double camera shooting
    • 2: 5g HD real-time image transmission
    • 3: Gestures shooting
    • 4: 3D VR mode
    • 5: 360° surround shooting
    8.5
    • 1: 4S HD Digital Whoop
    • 2: Compatible with Caddx Vista Module
    • 3: Light Weight, less than 250g
    • 4: Wheelbase: 87.6mm
    • 5: Material: Carbon Fiber
    8.3
    • 1: Standoff height: 25mm
    • 2: Propeller size: 4 inch
    • 3: Top plate thickness: 4mm
    • 4: Bottom Plate thickness: 2.5mm
    • 5: Body size: 123*111mm
    8.5
    • 1: The flight endurance up to 35 minutes
    • 2: The gimbal is detachable
    • 3: 4K HD resolution
    • 4: Ambarella H22 Image Chip
    • 5: Built -in 3800 mah smart lithium battery
    8.8
    • 1: Wheelbase: 120mm
    • 2: Size: 144mm *164mm * 46mm
    • 3: Weight: 97.25g
    • 4: Sensor: MPU-6000
    • 5: Motor Mode: GL1204 KV4500
    8.3
    • 1: Camera: Caddx Vista Nebula
    • 2: Motor to motor:79mm
    • 3: Antenna:5.8G
    • 4: Motor:GR1103 8000KV
    • 5: Flight Controller:GEP-12A-F4 AIO
    8.0
    • 1: Flight controller: Play F4 Whoop
    • 2: Version: F411CEU6
    • 3: Sensor: MPU-6000
    • 4: Board Size: 28.5 * 28.5MM
    • 5: Current: 5A continuous peak 7A
    8.5
    • 1: 3-Axis Stable Gimbal
    • 2: 1080P interpolation 4K
    • 3: 5G Image Transmission
    • 4: Up to 1,200 Meters of Range
    • 5: 2200MAH large-capacity battery
    8.5
    • 1: Newly adopted 1204 motor
    • 2: Caddx Tarsier 4K Camera & DVR ready
    • 3: Camera Angle adjustable
    • 4: VTX power switchable 25mw~200mw
    • 5: Smartaudio ready
    8.5
    • 1: Motor: BrotherHobby VY 2004-3150KV
    • 2: Camera: Caddx Ratel 2.1MM Lens
    • 3: Receiver: Frsky XM+
    • 4: Antenna: Hyperbola 5.8GHz, 2.5Dbi Gain
    • 5: Take off weight: 247g
    8.5
    • 1: Lihv Battery Capacity:260mAh
    • 2: Motor Mode:GL1202 KV6900
    • 3: Flight controller:SI-F4FC Three-in-one tower
    • 4: compatible Frsky (ac900)SPI receiver
    • 5: GL950PRO: 1/4 COMS sensor
    8.8
    • 1: Butter smooth XING-E 1204
    • 2: Ducts to protect the sensitive environment or yourself
    • 3: Pre-tuned with smooth cinematic settings
    • 4: iFlight Sigma 5.8G light antenna upgrade
    • 5: Pre-tuned with smooth freestyle settings
    8.3
    • 1: Carbon Fiber Plate: 2.5mm
    • 2: Canopy: Nylon Plastic
    • 3: Power Supply: 2-3S LiPo
    • 4: Estimated Flight Time: 4-7 minutes
    • 5: Wheelbase: 120mm
    8.5
    • 1: MCU:168MHz STM32F405
    • 2: Motor: XING-E 1204 4500KV
    • 3: BEC:5V 2.5A
    • 4: Wheelbase: 120mm
    • 5: Bottom plate thickness: 2.5mm
    8.5
    • 1: SucceX-D Mini F7 + 35A BL_S ESC Stack
    • 2: Bind and Fly Built and test flown
    • 3: Equipped with the DJI FPV Air Unit -Bind and Fly
    • 4: Buttery-smooth 720p 120fps FPV feed
    • 5: Pre-tuned with smooth freestyle settings
    8.5
    • 1: Wheelbase: 225mm
    • 2: Bottom plate: 2mm
    • 3: Upper plate: 2mm
    • 4: Arm plate: 5mm
    • 5: X plate: 2mm
    8.3
    • 1: Portable and lightweight
    • 2: Variety expansion
    • 3: Adjustable Tape for easy adjustment
    • 4: Long distance transmission
    • 5: Independent communication
    8.5
    • 1: Strong protection with EVA protective cover
    • 2: 186° duct design
    • 3: GOPRO cameras
    • 4: Type: 3 Inch Cinewhoop Frame
    • 5: Wheelbase:136mm
    8.3
    • 1: 155mm FPV
    • 2: MCU: STM32 F722RET6
    • 3: Material: 3K Carbon Fiber
    • 4: Side Plate: 1.5mm
    • 5: Weight: 247g
    8.5
    • 1: Wind resistance: ≤50kph
    • 2: Flying limit altitude: 500m
    • 3: Operating frequency: 5.725-5.850 GHz
    • 4: Battery : 3900mAh lithium battery
    • 5: Stabilization: 3-axis gimbal
    8.5
    • 1: Ultra-light 4 inch toothpick frame
    • 2: High-Quality TPU 3D printed canopy with exquisite design
    • 3: 140 grams without battery weight
    • 4: Equipped with Caddx Turbo EOS2
    • 5: The flight controller uses STM32F411
    8.3
    • 1: MCU: 216MHz STM32F722
    • 2: Gyroscope: 2x ICM20689
    • 3: Blackbox: 32MB
    • 4: BEC: 5V 2.5A / 9V 2.5A
    • 5: Current sensor scale: 100
    9.0
    • 1: Wheelbase: 105mm
    • 2: Material: 3K Carbon Fiber
    • 3: Flight Controller: TransTEC F411
    • 4: ESC: TransTEC Blheli_S 3-5S 25A
    • 5: Motor: TransTEC 1106 6000KV Motor
    8.5
    • 1: Potentiometer Gimbal
    • 2: Internal Multi-protocol RF System
    • 3: Supports Telemetry
    • 4: Memory 16M
    • 5: Voice function
    8.3
    • 1: Wheelbase: 145mm
    • 2: Bottom plate: 3mm
    • 3: Upper plate: 2mm
    • 4: Internal Resistance: 0.0495Ω
    • 5: Motor mount hole size: M2
    8.3
    • 1: Optical Flow Positioning
    • 2: Point of interest
    • 3: Follow me
    • 4: 5G WiFi 4K HD Camera
    • 5: 4K ultra HD camera
    9.0
    • 1: MCU: STM32F745 32-bit processor
    • 2: IMU: MPU6000 (SPI)
    • 3: Barometer: BMP280
    • 4: USB VCP Driver
    • 5: 6 hardware UARTS
    8.3
    • 1: Drone F4 OSD 12A 0803 Motor
    • 2: Power Supply: 2-3S LiPo
    • 3: Carbon Fiber Plate: 1.5mm+1.0mm
    • 4: Ducts: Nylon Plastic
    • 5: Wheelbase: 92mm
    8.3
    • 1: 1.6 Inch Cinewhoop FPV
    • 2: Wheelbase: 86mm
    • 3: Cam: RUNCAM NANO2
    • 4: Antenna: Copper pipe antenna
    • 5: Motor: MAMBA Racing MB1103 8500KV
    8.5

HOT DEALS